West Coast Products Online
Store Tag Line Goes Here
70cc Dirt Bike-FREE SHIPPING-BLACK
Looking for an high power mini dirt bike at great price? You get them both with the WC-70 70cc 4 stroke dirt bike. Why settle for less? At 589.00 (529.00 FOR EBAY buyers) the WC-70 is a great choice for anyone wanting a 70cc dirt bike. The standard features include Hydraulic front disc brakes (not found on most of competitors models unless you get 110 cc) oversize rear drum brakes, a rear mono shock & a swing arm.
*Graphics may vary on gas tank
*Graphics may vary on gas tank
- Model: WC-70bk
- MSRP: $669.00
- Our Price: $589.00
Description
Engine type: 70cc 4-stroke, semi-auto, single cylinder
Cooling: air-cooled
Bore*stroke: 47 x 41.4
Max speed: 35m/h
Ignition: CDI
Starting system: foot start
Engine oil: 4.2L
Clutch: automatic clutch
Transmission: Chain
Driving wheel: Rear wheel force
Brakes: Rear brake: Hub brake, Front brake: Disc
Tires, front/rear: 2.75-10 / 2.75-10
Wheel Base: 37"
Height to seat: 23"
Min ground clearance: 7.5"
Max load: 120 lbs
Some Assembly required! In most cases and depending on which model purchased, it usually takes anywhere from 10min.-40 min. to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping. For packaging purposes, the battery, handle bars, trunk (if included at time of purchase), and mirrors are removed during testing. These items along with the vehicle will be shipped in a protective crate. To complete the assembly of your vehicle, you will need to properly install/assemble the contents included with your vehicle. Depending on the model purchased, you will usually find these items in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time,(and periodically before every ride). Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need some cleaning due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our tech support team toll-free Monday through Friday 9am-5pm PST at 800-801-9523 or by E-mail at sales@westcoastproductsonline.com. In some instances, it may be necessary for your vehicle to be setup by a local service center for proper set-up and tuning, prior to initial use. This service is commonly referred to as PDI (Pre-Delivery Inspection). Be sure to check for adequate engine fluid levels to help ensure that your vehicle will operate safely according to the manufacturer’s recommended specifications, prior to first use. It is mandatory to have the existing motor/engine oil (known as “packing oil”) already in your motor/engine, replaced prior to initial use, with conventional Four Stroke “Motorcycle Grade” (SAE 15W-40 motor oil).
Cooling: air-cooled
Bore*stroke: 47 x 41.4
Max speed: 35m/h
Ignition: CDI
Starting system: foot start
Engine oil: 4.2L
Clutch: automatic clutch
Transmission: Chain
Driving wheel: Rear wheel force
Brakes: Rear brake: Hub brake, Front brake: Disc
Tires, front/rear: 2.75-10 / 2.75-10
Wheel Base: 37"
Height to seat: 23"
Min ground clearance: 7.5"
Max load: 120 lbs
Some Assembly required! In most cases and depending on which model purchased, it usually takes anywhere from 10min.-40 min. to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping. For packaging purposes, the battery, handle bars, trunk (if included at time of purchase), and mirrors are removed during testing. These items along with the vehicle will be shipped in a protective crate. To complete the assembly of your vehicle, you will need to properly install/assemble the contents included with your vehicle. Depending on the model purchased, you will usually find these items in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time,(and periodically before every ride). Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need some cleaning due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our tech support team toll-free Monday through Friday 9am-5pm PST at 800-801-9523 or by E-mail at sales@westcoastproductsonline.com. In some instances, it may be necessary for your vehicle to be setup by a local service center for proper set-up and tuning, prior to initial use. This service is commonly referred to as PDI (Pre-Delivery Inspection). Be sure to check for adequate engine fluid levels to help ensure that your vehicle will operate safely according to the manufacturer’s recommended specifications, prior to first use. It is mandatory to have the existing motor/engine oil (known as “packing oil”) already in your motor/engine, replaced prior to initial use, with conventional Four Stroke “Motorcycle Grade” (SAE 15W-40 motor oil).
